Aastra 6753I - Editing Speeddial Keys

___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 57 OF 86
Feature
Interaction Description
Call Transfer
(Unannounced)
You can pick up an unannounced (blind) transferred call, and you
can also transfer a picked-up call.
Do Not Disturb
You can pick up calls regardless of whether the answering party is
accepting calls.
Three-Way Call
It is not possible for the conference controller to pick up another
call. However, a participant in a 3-way call can pick up another call
by putting the original call on hold and dialing the Directed Call
Pick access code or pressing the Directed Call Pickup key.
6.11 Directed Call Pickup with Barge-In
Directed Call Pickup with Barge-in functions the same as Directed Call Pickup and allows you to
pick up a call ringing at another extension in the same group. However, it also allows you to barge
in on the call if the call was already answered. When the barge-in occurs, a 3-way conference call
is established between the parties. You, as the Barge-in user, have control of the conference.
Step
Action
Result
1.
 Press the Directed Call Pickup
Barge-In key.
Or
 Dial the Directed Call Pickup
Barge-In feature access code.
You hear dial tone.
2.
Dial the extension of the ringing party.
You are connected to the call.
6.12 Autodial (Hotline and Warmline)
Your System Administrator can configure an autodial feature on your phone. If autodial is enabled,
the phone automatically dials a preconfigured number whenever it is off-hook. Depending on the
configuration specified by your Administrator, the Autodial functions as either a “hotline”, or as a
“warmline,” as follows:
 Hotline: The IP phone immediately dials a preconfigured number when you lift the handset.
 Warmline: The IP phone waits for a specified amount of time after you lift the handset before
dialing a preconfigured number. If you do not dial a number within the time allotted, then the IP
phone begins to dial the number.
 Any speed dial numbers that you configure on your IP phone are not affected by autodial
settings.
 If Autodial is configured on your phone, any lines that function as hotlines do not accept
conference calls, transferred calls, and/or intercom calls.