Aastra 6753I - Intercom; Outgoing Intercom; Incoming Intercom; Use the Intercom Softkey

___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 58 OF 86
6.13 Intercom
6.13.1 Outgoing Intercom
You can use the Intercomkey to automatically connect to a remote extension. This feature is
enabled by the system administrator. You must have an Intercom softkey to use the Intercom
feature.
6.13.2 Incoming Intercom
By default, the IP phone allows incoming intercom calls to be automatically answered without
having to set up an Icom key on your phone. The phone automatically plays a warning tone and
mutes the microphone when it receives an incoming intercom call. If the intercom call comes to the
phone while an active call is already present, the phone puts the active call on hold and answers
the intercom call.
6.13.3 Use the Intercom Softkey
Step
Action
Result
Place an Intercom Call:
1.
Press the INCM key.
2.
Enter the extension number of the
person you wish to call on the
intercom or the BLF key for that
extension.
 You hear a beep tone.
 Your phone automatically connects
with the remote extension.
 You can speak through the remote
phone speaker.
End an Intercom Call:
1.
 Hang up the phone.
Or
 Press .
Or
 Press the line appearance key.
When you hang up, the remote phone also
hangs up.
6.14 Stuttered Dial Tone
If this feature is enabled on your phone, you hear stuttered dial tone when there is a message
waiting on your phone.
6.15 Speeddial
The Speeddial feature allows you to configure a Speeddial key on your phone. You can assign and
label Speeddial keys using the Press and Hold method.
The Speed Dial Edit feature allows you to edit a previously assigned Speeddial key using the
Phone UI Options List.