___________________________________________________________________________________________
CS AASTRA 6753i IP PHONE USER GUIDE AASTRA – 2786-003
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD. PAGE 60 OF 86
In the Enter Number field:
Enter a number (up to 16 numbers).
6.16 Speed Dial/Xfer
A Speeddial key allows you to use one key to dial a frequently dialed number. An Xfer key allows
you to transfer a call. The Speeddial/Xfer key combines the Speeddial and Xfer key's functionality
together allowing you to transfer calls or use Speeddial with one key.
The Speeddial/Xfer key has the following capabilities:
Speeddial/Xfer and Speeddial
Pressing the Speeddial/Xfer key while the phone is idle
causes the phone to go off-hook and dial the
predefined extension.
Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the
Speeddial/Xfer key blind-transfers the call to the
predefined destination.
If the transfer fails, the message “Transfer Failed”
displays, and you can retry the call by pressing the line
key again.
Speeddial/Xfer and Call Forward
Pressing the Speeddial/Xfer key while the phone is
ringing forwards the call to the predefined number.
6.17 Speed Dial/Conf
The Speeddial/Conf key allows you to conference another party at a pre-defined number while on
an active call. The line focus changes to the dialing line. A cancel softkey displays on the phone
allowing you to abort the conference speeddial if required.
The following messages display:
Ringing… - Displays when the far end is ringing.
Conf. Unavailable - Briefly displays when a conference is already in progress.
For example, while on a call, you can use the Speeddial/Conf softkey to dial a recording service
and have the resulting conference recorded.
If currently in a conference, the Speeddial/Conf softkey is disabled on the active call.
To Next Page
Loading...
