82 Model 6753i IP Phone User Guide
Line Keys and Programmable Keys
Park/Pickup Keys
The 6753i phone has a park and pickup call feature that allows you to park a call and pickup a
call when required.
The IP phones support the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ
PBX servers.
You can set programmable keys or expansion module keys on the 6753i to use the park/pickup
feature by setting a programmable key as "Park" or "Pickup”, and then:
• specify a value
• specify a line to use
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable "Park" key to
park the call.
• After the call is parked, you can press the "Pickup" key, followed by the applicable value to
pickup the call.
You configure a Park and Pickup programmable configuration using the Aastra Web UI.
The following table provides the values you enter for the "Park Call" and "Pickup Parked
Call" fields in the Aastra Web UI.
Park/Pickup Call Server Configuration Values
*Leave "value" fields blank to disable the park and pickup feature.
Note: The values you enter for each key are dependent on the type of server you
are using (Asterisk, BroadWorks, Sylantro, or ININ PBX).
Server Park Values* Pickup Values*
Aasterisk 700 700
Sylantro *98 *99
BroadWorks *68 *88
ININ PBX callpark pickup
To Next Page
Loading...
