96 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Configuring Directed Call Pickup (DCP) Key (for Sylantro Servers)
Use the following procedure to configure Directed Call Pickup on the 6755i IP Phone. The
procedure shows the softkey screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the “Type” field, select Directed Call Pickup.
4. In the "Label" field, enter a label to apply to this Directed Call Pickup key.
5. In the “Value” field, specify the extension you want to intercept when you press this softkey.
For example: 2200.
6. In the "Line" field, select the line for which to apply the Directed Call Pickup configuration.
Valid values are 1 through 9.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Aastra Web UI
To Next Page
Loading...
