Aastra 6755i - Creating a Speeddial Key Using the Sofkeys, Programmable Keys, or Expansion Module Keys

76 Model 6755i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Creating a Speeddial Key Using the Sofkeys, Programmable Keys, or Expansion
Module Keys
Use the following procedure to set a key to function as a speeddial. The procedure shows the
softkey screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20"
3. In the "Type" field, select Speeddial to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Value" field, enter the phone number, extension, or speeddial prefix to apply to this
key. If you enter a speeddial prefix, you must enter the "+" character at the end of the prefix
number (for example, "123456+").
6. In the "Line" field, select a line to apply to this key. Valid values are 1 through 9.
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
Aastra Web UI