128 Model 6757i CT IP Phone User Guide
Line Keys and Softkeys
Speeddial/Conf
The 6757i CT allows you to configure a softkey or expansion module key to be used as a
speeddial conference key (Speeddial/Conf key) while remaining in the current call. This key
allows a user on a call to conference another party at a pre-defined number while remaining in
the call.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording
service and have the resulting conference recorded.
If you configure a softkey or expansion module key as a Speeddial/Conf key and you press this
key while on an active call, the focused line changes to the dialing line. A Cancel softkey
displays on the phone allowing you to abort the conference speeddial if required. The message
"Ringing..." displays below the number when the far end is ringing. The message "Conf.
Unavailable" briefly displays when a conference is already in progress or the CT handset is in
use. The active call is not put on hold when the speeddial number is dialed.
Note: If currently in a conference, the Speeddial/Conf key is disabled on
the active call.
Note: This feature is not compatible with centralized conferencing.
To Next Page
Loading...
