Ascotel IntelliGate 2025/2045/2065
Part 2 Routing elements 209
4 Routing elements
The role of routing elements is to route and distribute internal, incoming and out-
going calls to destinations. From the system's viewpoint a destination is an inter-
face (e.g. network interface or user-network interface). In this context user groups
or subscriber configurations are also routing elements, not destinations.
The settings allocated to a routing element are carried out in the system configu-
ration. This chapter describes the individual routing elements; the interplay
between the routing elements is described in "Call Routing", page 267.
Fig. 2.28 shows how all the routing elements relate to one another:
[1] Routing via the numbering plan to one of the elements. Applies only to calls from the permanent net-
work PISN (see page 276)
[2] Routing via a transit route (see page 338) or as [1]. Applies only to calls from the permanent network
PISN
[3] Does not apply to calls from the analogue network
[4] Outgoing KT calls
Fig. 2.28: How calls are routed in the system
Network
connections
Trunk
groups
DDI plans
Routes
[1]
[2]
[1]
[3]
Call distribution
elements User groups
Subscriber
configurations
Subscriber
side
Network
side
1
2
haz0694aaena0
[4]
Key telephones
KT lines
Changeover switch for one or
more switching groups
Outgoing calls
Incoming calls
1
Operator console(s)
2
External Remote Control
4
ACD server
5
ACD queue
General call
3
1 3
3
4 5
To Next Page
Loading...
