Ascotel IntelliGate 2025/2045/2065
246 Routing elements Part 2
4.7 Subscriber Configuration
Fig. 2.48: Subscriber configuration in relation to the other routing elements
All the subscriber-specific settings are grouped together in the subscriber config-
uration. This chapter deals with the following topics:
• Routing and identification-specific settings
• Settings for PISN subscribers
4.7.1 Routing Functions for Incoming Calls
The incoming routing functions in the subscriber configuration are as follows:
• For a terminal the allocation of the internal subscriber number to a physical des-
tination (user-network interface, terminal selection digit and terminal type)
• For a cordless handset the logical allocation to a subscriber identification stored
in the handset
Network
connections
Trunk
groups
DDI plans
Routes
Call distribution
elements User groups
Subscriber
configurations
Subscriber
side
Network
side
1
2
haz0719aaena0
Key telephones
KT lines
Changeover switch for one or
more switching groups
Outgoing calls
Incoming calls
1
Operator console(s)
2
External Remote Control
4
ACD server
5
ACD queue
General call
3
1 3
3
4 5
To Next Page
Loading...
