Ascotel IntelliGate 2025/2045/2065
314 Call Routing Part 2
Manual alternative Routing
In some situations the LCR function cannot recognize that the primary network
provider is not available (for example if the network provider answers the call with
a voice message). The user then has the possibility to dial via the alternative net-
work provider manually. To do so he interrupts the connection and dials *90. The
number is then redialled in the same way as with a last-number redial but this time
via the alternative network provider.
If the user routes a call via the alternative network provider manually, no event
message will be generated.
If users are not to be authorized to dial the alternative network provider them-
selves, *90 should be barred in the internal digit barring.
Manual alternative routing also works if automatic alternative routing is not acti-
vated.
Restricted scope of performance by a Network Provider
Not all network providers offers every service (voice, fax, data traffic, etc.) If for
example the network provider table contains network providers that can only
transfer voice service, subscribers will have to manually force the data service-
compatible network provider they want when setting up data connections (see
"Bypassing LCR manually (Forced Routing)", page 317).
5.4.5 Conversion and Routing (Network Provider Table)
The phone numbers are converted specifically for each network provider based on
the network provider table; the call routing is then determined. 10 network pro-
viders can be entered in the table.
Tab. 2.49: Network operator table
Network
provider
Access
code
Route Barring Conversion rule User ID PIN Charge code
length
Network provider 1 0512 – unassigned EUKSN 4321 1234 3
Network provider 2 – 2 unavailable –
Network provider 3 – 3 unassigned
To Next Page
Loading...
