Ascotel IntelliGate 2025/2045/2065
Part 2 Call Routing 321
Tab. 2.57: LCR settings
Initialization Settings
After initialization the LCR function is deactivated.
When activating the LCR function after initialization, automatic alternative rout-
ing is activated.
5.5 Exchange-to-Exchange Traffic
Exchange-to-exchange traffic covers all interactions involving at least 2 subscrib-
ers in the public network and at least 1 local subscriber in the PBX (internal sub-
scriber).
5.5.1 Exchange-to-Exchange Connections
In an exchange-to-exchange connection two seized exchange lines to the public
network are connected with each other locally in the PBX.
Restrictions applicable throughout the system
Exchange-to-exchange traffic can be restricted or barred throughout the system.
The setting is not effective for inter-network connections to the public network or
to on one side only, e.g. PISN-PISN or PISN-exchange.
Parameter Parameter
value
Remarks
Least Cost Routing
(Account Manager):
• LCR On / Off Activate / deactivate LCR function throughout the system
(see page 306)
• Alternative Routing On / Off Activate / deactivate alternative routing throughout the
system (see page 313)
Subscriber configuration:
• LCR On / Off Activate / deactivate LCR function for a specific subscriber
(see page 306)
• Force routing (LCR) Yes / No Bypass LCR manually (see page 317)
• Internal digit barring Bar *90 Bar manual alternative routing (see page 313)
To Next Page
Loading...
