Aastra Ascotel IntelliGate 2025 - Page 327

Ascotel IntelliGate 2025/2045/2065
Part 2 Call Routing 327
See also:
""Wait for connection" setting", page 442.
Connecting two outgoing calls
This situation occurs for example
• when setting up a conference when both conference parties are called.
• when the attendant sets up a connection for a member of staff, then calls him
back and transfers the call.
Tab. 2.60: Features supported
Fig. 2.87: Connecting two outgoing calls
Two incoming calls
The B channels of two incoming calls can be connected with each other via a con-
ference circuit or by a normal call handover by going on-hook (transfer).
Tab. 2.61: Features supported
Subscriber A
Switching calls
Conference circuit
Subscriber C
Subscriber A
Conference circuit
Switching calls
Subscriber C
PBX
Subscriber B
Subscriber C
Subscriber A
haz0103aaenc0
PBX
PBX