Ascotel IntelliGate 2025/2045/2065
340 Call Routing Part 2
Tab. 2.68: Settings for PINX 1 routing parameters
Phone number with an exchange access prefix
If the phone number has an exchange access prefix without route information
(exchange access Business, Private, cost centre selection), the call will be routed
on via the transit route.
If the phone number has a route selection prefix, the call will be routed via the
corresponding route.
Note:
If a number has a route selection prefix and if NPI is E.164, the call will
be routed via the transit route without truncating the prefix.
The exchange access prefix is set under "Send access code" in the route configu-
ration of the source PINX.
Parameter Parameter value
Basic setup PISN:
• Transit route: 1 (route reference number for transit calls to the public network)
Route 1:
• Trunk groups 3 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier
NPI
E.164
• Type of number TON Unknown
• Send access code –
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Public
• Protocol DSS1
To Next Page
Loading...
