Ascotel IntelliGate 2025/2045/2065
Part 2 Features 441
System configuration
Tab. 2.133: Call Forwarding Unconditional: System configuration
Reference to Other Features
Call Forwarding Unconditional to exchange
Settings for exchange-to-exchange traffic (see also "Exchange access authoriza-
tions", page 433)
• Exchange-to-exchange connection enabled:
– External and internal calls are diverted to an external destination; a first-ring
CFU is not carried out. Requirement: "Subscriber with direct dial" is defined.
– If the conditions for transferring the Call Forwarding Unconditional to the
exchange are also met, the connection is transferred to the network (see
"Transferring Call Forwarding Unconditional to the Exchange", page 328).
Note:
Exchange-to-exchange connections can be further restricted, see
"Exchange-to-Exchange Traffic", page 321.
• Exchange-to-exchange connection not enabled:
– External calls are not diverted to an external destination.
– Internal calls are diverted to an external destination.
Parameter Parameter value Remarks
Predefined CFU <SC No.>
CFU first ring Yes / No
Rerouting in the Exchange Yes / No Subscriber Configuration
Rerouting in the Exchange Yes / No Trunk group configuration
Wait for connection Yes / No see "Call Forwarding Unconditional to exchange",
page 441
Forward to the last mail-
box
Yes / No see "Response with Call Forwarding Unconditional:",
page 481
Features:
• "Leave message", page 496
• "Follow me", page 444
• "Call Forwarding on No Reply (CFNR)", page 445
• "User group: Logging in and logging out", page 533
• "Searching via a paging system", page 536
• "Deflecting a call during the ringing phase (CD)", page 448"
To Next Page
Loading...
