Ascotel IntelliGate 2025/2045/2065
450 Features Part 2
Procedures During the Ringing Phase
Tab. 2.141: Call Deflection: Procedures
System configuration
Tab. 2.142: Call Deflection: System configuration
Reference to Other Features
8.2.5 Reject call
Calls for B are rejected during the ringing phase. This immediately clears down the
call set-up and therefore the ringing at B. Subscriber A obtains the busy tone.
Fig. 2.167: Rejecting a call during the ringing phase
Detailed Description
Tab. 2.143: Reject call
System terminals (excl. Office 10/20)
Deflecting a call during the ringing phase
(Call Deflection)
1.
2. The call number is entered via the keypad,
using dialling by name, the call list, etc.
3.
Parameter Parameter value Remarks
No settings
Features:
• "Call Forwarding Unconditional (CFU)", page 438
• "Call Forwarding on No Reply (CFNR)", page 445
• "Call waiting", page 477
• "Reject call", page 450
Interface Operating sequence / signalling
on the terminal
Scope
B The activation of the feature is
not confirmed.
• Office 25, 30, 35, 40, 45, 100, 130, 150, 155 via the
Foxkey
• ISDN terminals that support the feature. (The response
after rejection varies from one manufacturer to the
next)
BA
haz0926aaxxa0
To Next Page
Loading...
