Ascotel IntelliGate 2025/2045/2065
Part 2 Features 473
Fig. 2.181: Recall time
The recall time is defined throughout the system. A recall time can also be config-
uration individually for each subscriber. The recall time defined for the switched
subscriber (SC 200) takes priority. A recall (to SC 202) is triggered once that time
has elapsed.
In some cases the recall time used depends on the type or the configuration of
the switched subscriber (SC 200):
If the transferred subscriber is
• not an individual internal subscriber but in a user group with several other sub-
scribers, the recall time defined throughout the system is used.
• a PISN subscriber or an external subscriber the recall time defined throughout
the system is used.
• a virtual subscriber and if no recall time has been defined for that subscriber, a
separate recall time defined throughout the system for virtual subscribers is
used.
If the transferred subscriber has
• activated "CFU" or "CFB", the recall time used is the one defined at the CFU
destination.
PBX
PBX
PBX
Called subscriber (202)
Transferred subscriber (200)
Transfering subscriber to 200
without prior notice
The phone rings at the
transfering subscriber (202)
Recall time running
1.
2.
3. On expiry of the recall time
haz0212aaena0
To Next Page
Loading...
