Aastra Ascotel IntelliGate 2025 - Page 515

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 515
Prefix Dialling Procedures
Tab. 2.246: Private calls with password: Procedure
Other properties:
• During a call the procedure can also be made from an enquiry call.
• The called party sees the caller's subscriber number and not the number of the
terminal being used by the caller.
• For reasons of data protection no entry is made in the redial register.
• Unlike with procedure #36 (making calls with your own settings but on a third-
party phone) you cannot hang up after activating the function and then prefix
dial within 60 seconds.
• The same passwords are used as for the phone lock.
• Subscribers without their own terminals can be defined as virtual subscribers,
and can then also use this feature.
System Configuration requirements:
• For this feature to be used, the initialization passwords must be changed first
(see "Locking / unlocking a terminal (telephone lock)", page 510 for the pass-
word syntax).
• Private exchange access must not be defined or the private exchange access
prefix must be barred for all subscribers using internal digit barring.
Note:
#46 temporarily bypasses any exchange access barring and the external
digit barring of the subscriber identified by means of his subscriber num-
ber and password.
Reference to Other Features
*/# procedure
Private call with password from one’s
own terminal or from a third-party termi-
nal
#46 <SC No.> <Password> <external call number>
Features:
• "Making calls with your own settings on a third-party telephone", page 489
• "Unlocking the terminal for each call", page 511