Ascotel IntelliGate 2025/2045/2065
516 Features Part 2
8.4.20 Appointment call
Each subscriber can configure one individual appointment call and one perma-
nent appointment call in the PBX, which are then stored in the PBX.
Fig. 2.204: Appointment call
Detailed Description
Tab. 2.247: Appointment call
Individual call orders are executed only once over the next 24 hours.
The appointment call is not rerouted even if CFU, CFNR or do not disturb are acti-
vated.
Permanent call orders are executed daily (Saturdays and Sundays included). The
call order is activated from the corresponding subscriber set. If a subscriber busy,
the appointment call is carry out once he has completed his call.
The "Clear configurations" feature (*00) does not cancel appointment reminder
calls.
Prefix Dialling Procedures
Tab. 2.248: Appointment call: Procedures
Interface Operating sequence / signalling on the terminal
A • Once the procedure has been executed, A obtains the acknowledgement tone.
• If the wake-up time is reached, the terminal will ring for 1 minute.
*/# procedure
Activate individual call order *55 hh mm
(hh = hour 00...23; mm = minute 00...59)
Activate permanent call order *56 hh mm
(hh = hour 00...23; mm = minute 00...59)
Clear individual call order #55
Clear permanent call order #56
haz0232aaxxa0
To Next Page
Loading...
