Ascotel IntelliGate 2025/2045/2065
520 Features Part 2
8.5 Special features
Here describes features that are available only in combination with a special appli-
cation or supplementary equipment, e.g. Courtesy service or door bell.
8.5.1 Coded ringing on general bell
The installation of a general bell feature provides a paging system, albeit with a
limited scope. Up to five internal subscribers can be paged using a specific coded
ringing on the general bell. A subscriber who recognizes his ringing pattern can
answer the call from any terminal B.
Fig. 2.207: Coded ringing on general bell
Detailed Description
Tab. 2.256: Search via coded ringing on general bell
Coded ringing consists of a long tone followed by n number of shorter tones (n
= 1…0.5) and is set via the system configuration.
Coded ringing can be used as the destination for a Call Forwarding Unconditional.
The PS must be deactivated.
Interface Operating sequence / signalling on the terminal Scope
A • A obtains the ring-back tone
• A obtains the busy tone (the display reads
"unavailable") if the general bell is busy
(queue full).
Possible interfaces:
The function is activated locally on the system.
B Possible interfaces:
Internal
A B
haz0201aaxxb0
To Next Page
Loading...
