Ascotel IntelliGate 2025/2045/2065
522 Features Part 2
Detailed Description
General bell is activated via user group (UG) or via proxy.
If other calls are routed to the general bell, they are placed in a queue (max. 10
entries).
Tip:
General bell in the UG of the operator console with delay:
If the attendant is absent for a short time (or is overloaded), the general
bell is activated after the delay time. Employees who hear the ringing
tone can then answer the call.
Prefix Dialling Procedures
Tab. 2.260: Answer general bell: Procedure
System configuration
Tab. 2.261: Answer general bell: System configuration
General Bell on an Analogue user-network interface a/b
Besides the connection via a potential-free relay contact on the mainboard the
general bell can also be connected to an analogue user-network interface a/b.
a/b connected. On each system precisely one a/b port can be configured for this
purpose. Any subscriber number already assigned is then automatically deleted.
Once the connection is made, no calls can be made or received via the port.
System configuration
Tab. 2.262: Analogue port for general bell: System configuration
*/# procedure
Answer ringing signal on general bell *83
Parameter Parameter value Remarks
General Bell Yes User group
General Bell Yes Substitution
Parameter Parameter value Remarks
General Bell Yes Interface configuration
To Next Page
Loading...
