Ascotel IntelliGate 2025/2045/2065
Part 2 Features 531
The feature is not supported in the following cases:
• Internal calls and calls to PISN or virtual PISN subscribers
• External calls via analogue network interfaces
• In combination with an abbreviated dialling that contains other */# procedures
• In combination with dialling using a line key
The outgoing call is rejected and the subscriber obtains the busy tone.
Notes:
The function is not executed when used in connection with ISDN sup-
plementary services in the exchange such as ECT, PARE or CD, i.e. the
call number is displayed to the called party.
Depending on the network provider and service provider it may be nec-
essary to subscribe to CLIR.
Prefix Dialling Procedure
Tab. 2.272: Activate CLIR for one call: Procedure
System configuration
Tab. 2.273: Activate CLIR for one call: System configuration
Reference to Other Features
8.5.7 Recording malicious calls (MCID)
By activating the Malicious Call Identification service, MCID for short, a subscriber
B can have the threatening or nuisance calls from an external subscriber A
recorded by the network provider so that the caller can be identified. The record-
ing can be activated either during the call or after the call during the busy tone
signalling (once the caller has rung off).
*/# procedure
Activate CLIR for one call *31 external destination No.
Parameter Parameter value Remarks
No settings
Features:
• "Suppressing CLIP / COLP (CLIR / COLR)", page 188
• "Displaying Numbers (CLIP) and Names (CNIP)", page 179
To Next Page
Loading...
