Ascotel IntelliGate 2025/2045/2065
Part 2 Features 545
Detailed Description
Tab. 2.302: Externally remote-controlled features and system functions
Procedures
Tab. 2.303: External remote control: Procedure
Example:
An external subscriber activates Call Forwarding on No Reply using the following
procedure:
:
Fig. 2.215: Sequences for external remote control of features
Interface Operating sequence / signalling on the terminal Scope
A • A dials the call number for remote control
• After 5 seconds of ringing the connection is
established and A obtains the internal dial
tone. The PBX automatically switches to DTMF
mode.
• A enters his password followed by "#".
• A again obtains the internal dial tone
• A dials *06 ... (as for internal remote control).
Possible interfaces:
• Public ISDN network
Requirements:
• DTMF-compatible telephone.
• Valid password
B Requirement:
• Authorization for remote control access
*/# procedure
Change */# procedure using external
remote control
<DDI No.>< Password> #*06 <SC No.> <*/# procedure>
*06 22 *61 24
Destination number for call forwarding RWS
Feature to be carried out (call forwarding)
Number of the subscriber on whose behalf a
feature is to be activated / deactivated
"Remote-controlled features" identification
Password input via DTMF (finalize with "#")
Call number for remote control
haz0234aaenc0
032 1234567 091827
To Next Page
Loading...
