Aastra Ascotel IntelliGate 2025 - 2.4.3 Special cards

Ascotel IntelliGate 2025/2045/2065
Part 3 Expansion Stages 585
2.4.3 Special cards
All cards that are not part of the families of trunk cards or subscriber cards belong
to the category of special cards.
IP interface cards AIP-6400 and AIP-6350
These cards with a different functionality are both based on the card IPI-100BT. It
features a 10/100 MBit/s Ethernet interface with automatic detection of the trans-
mission speed. Depending on the software loaded, the IPI-100BT card becomes
the AIP-6400 card or AIP-6350 card.
• With the AIP 6400 software the card functionally becomes an Ascotel IP gate-
way AIP 6400. The applications are VoIP (Voice over Internet Protocol) and
QSIG networking in the IP network. The card makes it possible to network mul-
tiple PBXs in different locations via an existing voice-compatible IP network.
• With the AIP 6350 software the card functionally becomes an Ascotel IP gate-
way AIP 6350. Its application is to link up IP terminals via the AD2 protocol,
enabling remote workstations to be integrated into the system.
It is possible to use the expansion cards AIP-6350 and AIP-6400 simultaneously in
a single system. However the total number of cards must not exceed the limits in
Tab. 3.13.
Tab. 3.7: Resources of the special cards AIP-6400 and AIP-6350 (basic card IPI-100BT)
SC-16AB 16 x a/b 1
1)
110
ISDN-04ST 4 x S/T
2)
128
ISDN-08ST 8 x S/T
2)
1
1)
18
1)
Due to the system limits not all the interfaces can be used (see Tab. 3.18)
2)
Interfaces are individually switchable
AIP -6400 Number per IP interface card
Simultaneous VoIP / QSIG over IP connections 12
Ascotel systems networkable via IP 50
AIP -6350
Call channels active simultaneously 12
Office 35IP / Office 1600IP terminals 32
Card type User-network interfaces per card Max. number for Ascotel IntelliGate
2025 2045 2065