Aastra Ascotel IntelliGate 2025 - Page 691

Ascotel IntelliGate 2025/2045/2065
Part 3 Planning a private network 691
Make sure the "Number" is left blank. It is used, for example , if the subscribers
are to be linked up in a virtual network.
Complete numbers can also be created as PISN subscribers. This allows you to
define exceptions in blocks. These numbers can be assigned names, which are
then available for dialling by name. In this way you can implement dialling by
name throughout the network.
Assuming Mr Newton is a subscriber in system 3, with call number 420. He is to
be obtainable using dialling by name from the other systems, too. To this end, we
need to create in the other systems a PISN subscriber with Mr Newton's complete
call number:
1. In system 1 and system 2 create a PISN subscriber with call number 420.
2. In the subscriber configuration of both systems, assign route 7 to this PISN
subscriber.
3. In the subscriber configuration of both systems, assign the name to this PISN
subscriber.
Fig. 3.72: Entering a separate PISN subscriber (example)
haz0804aaena0
PISN SC 4xx
-> Route 7
410 410 410 410
410
PISN SC 4xx
-> Route 7
B
PINX 2 PINX 1 PINX 3
PISN SC 420
Newton I.
-> Route 7
Newton 420 420
Mr Newton
420
PISN SC 420
Newton I.
-> Route 7
B
A
A
PINX 2 PINX 1
PINX 3
SC 420
Newton I.
-> SC 410