Ascotel IntelliGate 2025/2045/2065
Part 1 System Interfaces 73
Not all V.24 interfaces on the system have the same functionality. The following
table shows how the individual interfaces are used:
Tab. 1.5: Functionality and application of the V.24 interfaces on the system
For more information on the V.24 interfaces on the system see "V.24 Interface",
page 788.
3.3.3 Interface for Door Intercom System
Door intercom systems can be connected to the system via the OI-2DOOR expan-
sion card. A bell key is backed by an internal destination. The door intercom sys-
tem can be addressed via an internal number.
A loudspeaker system can also be operated via the interface for door intercom
systems.
3.3.4 Interface for General Bell
Calls can also be routed to the general bell. Bells or lamps connected to the gen-
eral bell interface signal calls which can be answered by anyone from any sub-
scriber's phone.
With "Coded ringing" can be used to assign different ringing patterns to different
destination persons or groups and, in this way, create a simple type of paging sys-
tem.
Function / Application V.24 on the Mainboard V.24 on the Pocket Adapter
Call data output (OCL / ICL)
via printer or PC
✓✓
Individual charge data output (ICC) via
printer or PC
✓✓
Dialling from PC with AT commands – ✓
Dialling from PC with Unimodem on Windows – ✓
TAPI TSPI PC Windows – ✓
Ascotel Messaging System ✓✓
Data service with PC – –
Interface to hotel management systems ✓ –
PBX configuration with PC (AIMS) ✓✓
1)
1)
PA Version ≥ V2.4
To Next Page
Loading...
