Ascotel IntelliGate 2025/2045/2065
Part 5 835
Part 5 Configuration
1 Overview of Chapters
AIMS configuration tool
The AIMS Configuration Manager helps to create and manage the system's cus-
tomized features. Chapter 2 shows you how to enter directly on the screen the
settings for the PBX and the concept for internal and external access.
Enabling local access
Chapter 3 features the four authorization levels for local access. Authorization
regulates the settings that a subscriber is entitled to make or modify. Other topics
include the syntax and updating of passwords, and the recording of access or
failed access attempts to the system's configuration in the PBX's access log.
Enabling remote access
Remote access can be enabled or barred using AIMS or */# procedures. The */#
procedures can be stored under a function key. Information on enabling a one-
off or permanent remote access can be found in Chapter 4.
Configuration Steps
The actual configuration work for the PBX / PINX begins once the system has been
initialized using the hardware or AIMS. Chapter 5 describes the sequence in
which the numbering plans, subscribers, call distribution and routing elements
should be defined. It also describes the configuration processes for cordless sys-
tems. The procedure for reading the initialization values is described at the end of
the Chapter.
To Next Page
Loading...
