Aastra Ascotel IntelliGate 2025 - 2.3 Settings; 2.3.1 Settings on the PBX

Ascotel IntelliGate 2025/2045/2065
840 AIMS configuration tool Part 5
Fig. 5.4: Connection option for LAN access for PBX configuration
Cable for LAN access
• Cable (see "Ethernet Interface", page 799)
2.3 Settings
2.3.1 Settings on the PBX
Remote maintenance has to be enabled in the PBX’s system Configuration. The
following communication parameters have to be set in the Configuration Man-
ager under "IP Configuration":
• ”IP configuration RDF”: TCP / IP settings for local or dial-up access
• "IP configuration Ethernet": TCP / IP settings for access via LAN
For external access the following parameters must be entered in the data service
destination table under "Routing elements: data service":
• Data service: "B channel transparent"
• Destination: Call number of the remote maintenance access (initialisation
value: "898")
IP
PBX
LAN
haz1199aaxxa0