Ascotel IntelliGate 2025/2045/2065
Part 5 Enabling local access 849
Identification of the AIMS Manager
The CLIP can be used subsequently to determine whether the maintenance or
retrieval process was carried out via the "Support / Service Centre" using "AIMS
Remote Maintenance" or via "AIMS Configuration".
Retrieving the log via AIMS
All access logs can be retrieved via AIMS.
3.4.2 Entering the processes in the log
Each access attempt generates an entry in the corresponding list.
In the case of a remote maintenance access an entry will not be generated if
remote maintenance is barred or if "CLIP = required?" is set to "Yes" in the con-
figuration and no CLIP is received.
Access attempts in accordance with the authorization level
The Access Attempts List logs all the failed attempts to access the PBX.
• If an access attempt via AIMS was denied due to the fact that another user is
already carrying out a PBX configuration, the value "0" is entered in the corre-
sponding list as "duration of the maintenance".
• If a change in the authorization level with password prompt occurs during the
configuration phase, the change will also generate an entry in the list with the
new authorization level.
• If the HEX rotary switch is on position "5", each access attempt will be entered
in the access log under the "Installer" list
To Next Page
Loading...
