Ascotel IntelliGate 2025/2045/2065
862 Configuration Steps Part 5
3. In the "Hardware Configuration" add the following hardware:
– Slot 1: SC-16AD2 (default setting of the terminal type "unknown")
– Slot 2: TC-04AB
– Slot 3: ISDN-02PRA
– Slot 4: (blank)
–Slot 5: DSP-02
4. In the "Interface Configuration" set interface 0.13 from T to S and the inter-
face type from ETSI to External S.
5. Under "Radio Unit" set up an Ascotel DECT system in slot 0.8.
6. Under "DDI Settings" set up the following direct dialling numbers:
– Press "New Number".
– Enter 20 as the start value and 55 as the end value.
– Answer the prompt "Link Matching Subscribers?" with "Yes, create non-
matching also". Do not modify the default settings in the other fields of
this dialog box. The DDI numbers 20-55 are set up with the relevant CDE.
7. Under "Subscribers" enter the following terminals for the following user-net-
work interfaces:
– Interface 1.1-1: Office 10
– Interface 1.2-1: Office 20
– Interface 1.3-1: Office 25
– Interface 1.4-1: Office 30
– Interface 1.5-1: Office 35
– Interface 1.6-1: Office 40
– Interface 1.7-1: Office 45
– Interface 1.8-1: Office 45pro
8. Set up five DECT subscribers with the following call numbers and handsets
and one GAP handset:
–50: Office100
–51: Office135
– 52: Office 135pro
–53: Office150
– 54: Office 155pro
– 55: GAP handset
To Next Page
Loading...
