Ascotel IntelliGate 2025/2045/2065
Part 7 Data Maintenance 891
The "Configuration" tab
The "Upload" tab contains information, input and selection possibilities for the
system type, software version and the PBX connection.
"PBX" Tab
This tab is used to define when the newly loaded system software is to be acti-
vated and how long it should be monitored to ensure it is operating without fault.
"Optionen" pull-down menu
The "Options / Settings" menu item is used to configure the communication link.
Monitor
The Upload Monitor is an Upload Manager function and is called up using
"Options / Monitor". The Upload Monitor is used to call up detailed information
on the PBX ( e.g. hardware expansion, event messages, upload configuration).
The Upload Monitor is not available while a software upload is running.
2.2.2 PBX connection
The communication link for a software upload is selected in the "PBX connection"
field of the "Upload" tab. The possibilities for the PBX are as follows:
• Local access:
This operating mode is designed for a software upload via the V.24 interface
of the mainboard or of a Pocket Adapter via PPP.
• Dial-up access:
A software upload is possible via an ISDN connection (PPP protocol) in the pub-
lic network (external dial-up access) or in the private network (internal dial-up
access). The call number under which the PBX can be reached via remote main-
tenance has to be entered.
• Local access Xmodem port:
This PBX connection type is designed only for an Emergency Upload (no func-
tional system software available on the PBX) (only via COM1).
With this operating mode the software is loaded via the V.24 interface on the
mainboard using the Xmodem protocol.
•LAN:
This operating mode is designed for a software upload via LAN.
To Next Page
Loading...
