Aastra Ascotel IntelliGate 2065 - 7 Ascotel IP Gateway AIP6400

Ascotel IntelliGate 2025/2045/2065
124 Ascotel IP Gateway AIP 6400 Part 1
7 Ascotel IP Gateway AIP 6400
By using the expansion card AIP 6400 the customer has the possibility of capital-
izing on the resources of his existing intranet (LAN / WAN) to implement a cost-
saving extension of his internal phone network.
The AIP 6400 expansion card is used for networking the PINX via the LAN / WAN
(see AIP 6400 System Manual).
Data services such as remote maintenance, fax group 3 / group 4 and modem
operation are not possible with the Ethernet interface on the expansion card.
Configuring the IP Gateway AIP 6400
The IP Gateway AIP 6400 can be configured from any PC with network access.
The only requirement is that the IP address for the Ethernet interface is known on
the expansion card. The main page of the configuration appears on the PC once
the IP address has been entered in a conventional commercial web browser and
after authentication by means of user name and password.
Technical data
The expansion card AIP 6400 is fitted into an expansion slot.
Tab. 1.15: IP-Gateway AIP 6400 technical data
Number of VoIP channels per
Expansion card AIP-6400
1)
1)
1 primary rate access is taken up on each Gateway interface. This primary rate access is therefore no
longer available as a network interface.
max. 12
Ascotel systems networkable via IP max. 50
LAN connection Ethernet 10Base-T / 100Base-T with autodetect
Voice data conversion ISDN-PCM (PBX) ↔ H.323 (LAN) with G.711 uncompressed
or G.723 compressed
Voice compression Approx. 3.5:1 (with G.723)
Signalling conversion Q.931 (PBX) ↔ H.323 (LAN)
Number of expansion cards of the type
AIP-6400 per PBX
2025: Max. 1
2045: Max. 2
2065: Max. 4
Quality of Service IEEE 802.1 p/Q