Ascotel IntelliGate 2025/2045/2065
196 Identification Elements Part 2
Tab. 2.11: CLIP related settings
Subscriber
Call to the Public Network
Call to the public network with exchange access prefix via a trunk group with
"Type of network = public":
If "CLIP automatic = yes", the DDI number will be used as CLIP if the subscriber
is himself reachable by incoming calls via the path trunk group → direct dialling
plan → CDE. If there is no direct dialling plan or corresponding DDI number, the
CLIP number entered in the trunk group will be used instead.
The numbering plan and type of number are always taken from the trunk group.
If "CLIP automatic = no" the configured number is used without any further
changes.
Configuration Element Parameter Affect on CLIP
Incoming Outgoing
Subscriber Automatic CLIP
Suppress CLIP
Numbering plan NPI
Type of number TON
Number
✓
✓
✓
✓
✓
PISN Subscriber Number
CLIP selection (normal, subscriber CLIP)
✓
✓
Trunk groups Call NPI unknown
Automatic CLIP
Suppress CLIP
Numbering plan NPI
Type of number TON
Number
Truncate CLIP
✓
✓
✓
✓
✓
✓
✓
CLIP settings International prefix
Country code
National prefix
Long-distance code (national code)
Display CLIR
✓
✓
✓
✓
✓
Numbering Plan Separate Regional Prefix ✓✓
To Next Page
Loading...
