Ascotel IntelliGate 2025/2045/2065
230 Routing elements Part 2
The CDE forwarding time can be set individually for each call distribution element.
Note:
If a CDE destination is also defined under "Default CF if no answer" in
the subscriber configuration, the call will be redirected after the internal
or external delay configured there (see "Default Call Forwarding per
Subscriber", page 277).
Courtesy (announcement prior to answering)
A previously activated Courtesy will remain activated if the call is routed to the
alternative destination. Courtesy is not reactivated at the next CDE.
Alternative Destination is Busy
If the original destination is busy, the call is routed to the call distribution element
entered under "CDE if busy". If the alternative destination is also busy, the call is
routed to the next alternative destination -- if such a destination has been config-
ured. This process can be repeated up to the fifth call distribution element. If the
destination of the fifth call distribution element is also busy, the caller will obtain
the busy tone.
Fig. 2.39: Routing to an alternative destination if the original destination is busy
220
230
Busy
haz1204aaena0
Call distribution element 2
Call distribution element 3
-> SC 220
-> CDE if no answer: 3
-> SC 230
To Next Page
Loading...
