Ascotel IntelliGate 2025/2045/2065
242 Routing elements Part 2
Any call forwarding to internal destinations that have been activated by group
members are observed.
Any call forwarding to external destinations and PISN subscribers will result in the
members concerned being logged out of the user group. The last member
remaining in the subscriber group does not have the possibility of activating an
external Call Forwarding Unconditional and cannot log out of the user group.
Call Forwarding on No Reply can be activated at any time.
If all the members are busy, the system will respond as follows:
• An external call will be routed in accordance with the emergency routing con-
cept (see "Response if busy", page 279.
• An internal call will be acknowledged with the busy tone.
Ascotel DECT-Subscribers
Ascotel DECT subscribers can be entered in a user group in the same way as inter-
nal subscribers.
GAP Subscribers
The following restrictions apply to entering GAP handsets as UG members:
• Only one GAP subscriber per user group
• A user group with one GAP subscriber must not contain any other DECT sub-
scribers
4.6.2 Large user groups
Any user group in the PBX can be configured as a large user group in the System
Configuration ("Large User Group = Yes"). Large user groups differ from ordinary
user groups in the following ways:
• Apart from the general system limits (see Tab. 3.17) there is no other restriction
on the number of members in a subscriber group.
• The elements Operator Console and General Bell are not possible.
• Global call distribution is not possible
• Subgroups are not available
To Next Page
Loading...
