Ascotel IntelliGate 2025/2045/2065
300 Call Routing Part 2
Fig. 2.74: Overview of a configuration for emergency applications
Scope
The priority setting is activated only in the case of direct dialling, not however in
the case of call forwarding, CFNR etc
In a private network the prioritization of an outgoing connection is only possible
on the PBX connected to the public network (gateway PINX).
In principle all internal subscribers can be defined with "External priority = emer-
gency", even if there are fewer B channels to the public network than authorized
subscribers.
Connections seized by subscribers who also have priority will not be cleared
down.
Note:
Network interfaces used for external priority calls must be connected
with the public network and active. It is advisable to provide a specific
network interface for this purpose and to check it on a regular basis.
a/b
S
Input devices for
emergency situations
(switches, keys, phones, etc.)
Independent alarm system
Modem
Terminal
Adapter
Public /
private network
Remote alarm
headquarters
(police e.g.)
T
T
PBX
haz0126aaend0
To Next Page
Loading...
