Aastra Ascotel IntelliGate 2065 - 5.4.2 LCR Function

Ascotel IntelliGate 2025/2045/2065
306 Call Routing Part 2
Network provider A can respond to the call in the following way:
• He either routes the destination number on directly using his own numbering
plan.
• He takes the call and waits for code information, such as the destination
number, to be transmitted by the caller in DTMF mode.
5.4.2 LCR Function
To be able to make outgoing phone calls, a PBX subscriber normally dials an
exchange access prefix first.
If the LCR function is deactivated the PBX routes the call in accordance with the
exchange access prefix dialled (see "Exchange access authorization", page 299).
If the LCR function is activated and able to analyse the phone number dialled, the
phone number will be routed in accordance with the configured LCR criteria. The
exchange access prefix is not analysed by the LCR function.
The LCR function can be activated or deactivated throughout the system. If it is
activated, it can be deactivated for individual subscribers.