Ascotel IntelliGate 2025/2045/2065
312 Call Routing Part 2
A total of 10 routing tables with up to 10 time zones each can be defined.
Tab. 2.45: Example of a routing table
Depending on the current zone a call will be routed to one of the following net-
work providers:
• Primary network provider
• Alternative network provider (alternative routing)
• Network provider in accordance with the subscriber-specific routing (subscriber
configuration)
The criteria for selecting one of these network providers are shown in Tab. 2.46.
Tab. 2.46: Selection of the network provider depending on settings and situation
If neither the network provider selected initially nor the alternative network pro-
vider is available, the call will be cleared down. The caller will obtain the conges-
tion tone.
Automatic alternative routing can be activated or deactivated throughout the sys-
tem.
Time zones Day(s) Time Primary
Network provider
Alternative
Network provider
Zone 1 Mon-Fri. 08:00–17:29 Network provider 1 Network provider 2
Zone 2 Sat-Sun 08:00–17:29 Network provider 2 –
Zone 3 Mon-Sun 00:00–07:59 Network provider 3 Network provider 1
Zone 4 Mon-Sun 17:30–23:59 – Network provider 1
Settings in the routing table Response of the LCR function
Primary
Network provider
Alternative
Network provider
Network provider
1
- Routing to network provider 1; if this is not possible, routing in
accordance with the subscriber configuration.
Network provider
1
Network provider 2 Route to network provider 1; if this is not possible, alternative
routing to network provider 2
– Network provider 2 Routing in accordance with the subscriber configuration; if this
is not possible, alternative routing to network provider 2.
– – Routing in accordance with the subscriber configuration