Ascotel IntelliGate 2025/2045/2065
Part 1 What's New 33
Overview of the Innovations in Ascotel with I5
PBX Hardware Platforms
• The PBX hardware has been completely revised. The three modular systems are
based on two basic systems. One shared system for Ascotel 2025 and
Ascotel 2045, and a separate system for Ascotel 2065.
Older systems cannot be upgraded. Existing configuration data can be ported
onto the new systems.
• Compared with I4Net systems the new hardware platforms process up to three
times more traffic capacity (load).
• 4x, 8x, 16x and 24x cards are available for expanding the system with AD2
user-network interfaces.
• The systems' basic equipment includes two serial interfaces and an Ethernet
interface.
• The IPI-100BT card replaces the MIPR module; it is used for the application IP
Gateway AIP 6400.
• The USP-12V module ensures that the system is able to operate without inter-
ruption in the event of a 230 V mains failure. This means that emergency cir-
cuits are now redundant.
• A system can be operated with 48 VDC using the DC-48V module.
• All systems can either be wall-mounted or rack-mounted inside a 19" cabinet.
• An external Auxiliary Terminal Power Supply (ATPS) is available for system
expansions with large numbers of terminals with high power requirements.
System Terminals
• The new family of system terminals with 5 corded terminals Office 10,
Office 25, Office 35, Office 45 and Office 45pro stands out by virtue of its
design and proved Foxkey operation. Office 45/45pro can be used as
an ordinary phone, a key telephone or as an Operator Console, and replaces
the Crystal. The system terminals Office 20, Office 30 and Office 40 are sup-
ported as before.
• An expansion keypad and an alpha keyboard are available as options.
• For Office 45/45pro the system offers centralised full-duplex handsfree opera-
tion.
• The CTO family of system terminals (Crystal, Topaz, Opal) is no longer sup-
ported.
To Next Page
Loading...
