Aastra Ascotel IntelliGate 2065 - 2 Safety and Commissioning

Ascotel IntelliGate 2025/2045/2065
Safety and Commissioning37
2Safety and Commissioning
Please observe the following instructions on proper use and procedure:
•The Ascotel IntelliGate 2025, Ascotel IntelliGate 2045 , and Ascotel IntelliGate
2065 systems are designed exclusively to be used as telecommunication sys-
tems for voice and data transmission.
•The Ascotel IntelliGate 2025, Ascotel IntelliGate 2045, and Ascotel IntelliGate
2065 systems can be operated in conjunction with Office family terminals,
standard ISDN terminals, analogue terminals, and with supplementary equip-
ment and applications distributed or certified by Aastra.
• Observe the provisions of the System Manual when installing, commissioning,
and operating the system. These provisions of the System Manual are essential
for safety-relevant operations, such as earthing, installation, connection to the
230 V mains, etc.
Safety Considerations
Special hazard alert messages with pictograms are used to signal areas of partic-
ular risk to people or equipment.
Hazard:
Failure to observe information identified in this way can put people and
hardware at risk through electrical shock or short-circuits respectively.
Warning:
Failure to observe information identified in this way can cause a defect
to a module.
Warning:
Failure to observe information identified in this way can lead to damage
caused by electrostatic discharge.
Note:
Failure to observe information identified in this way can lead to equip-
ment faults or malfunctions or affect the performance of the system.
haz0001aaxxa0