Ascotel IntelliGate 2025/2045/2065
Safety and Commissioning 39
Hazard:
Explosion hazard through operation in areas subject to explosion haz-
ards.
Do not install the systems in areas subject to explosion hazards.
Installation Instructions
Observe the installation instructions precisely with regard to the components
installed, the earthing concept and the connection of the system.
Observe the electrical limiting values specified in the System Manual when con-
necting third-party equipment such as switchgears, music sources, etc., to the sys-
tem.
During Operation
During operation, the system is under 230 V mains voltage. Disconnect the sys-
tem from the power supply when work requires opening the inner housing cover.
Maintenance Work
Any servicing, expansion or repair work is to be carried out only by technical per-
sonnel with the appropriate qualifications.
Replacing Components
Cards should be fitted or removed only once they have been disconnected from
the power supply. Always use original parts and components exclusively from the
Ascotel range.
PCBs are to be stored and shipped only in the specially designed antistatic pack-
aging.
Cleaning
Clean the terminals with a damp cloth. Never use aggressive detergents.
To Next Page
Loading...
