Ascotel IntelliGate 2025/2045/2065
442 Features Part 2
Calls that reach the subscriber via user group are not diverted externally. For this
reason the PBX switches the subscriber out of the user group if he defines an
external CFU.
A user group in use must not be empty, which means that the last remaining sub-
scriber cannot activate CFU to an external destination.
"Wait for connection" setting
Specifies whether a Call Forwarding Unconditional of an external call to the
exchange is always switched through or only if the called party answers a call (and
a connection is therefore set up):
• "Wait for connection = no"
The Call Forwarding Unconditional is always switched through.
• "Wait for connection = yes"
The Call Forwarding Unconditional is switched through only if a connection is
set up.
If the destination subscriber is busy or unobtainable, this setting ensures that
the caller does not incur charges for the connection up to the PBX.
Example
Call Forwarding Unconditional to a mobile network subscriber who has switched
off his handset:
• If "Wait for connection = no" has been set, the Call Forwarding Unconditional
will be switched through: The callers will obtain a spoken text provided by the
mobile network provider, indicating that the required subscriber cannot be
reached at present.
• If "Wait for connection = yes" is set, the Call Forwarding Unconditional is not
switched through and the caller will obtain the ring-back tone.
Scope
This feature is available only with stand-alone PBXs and gateway PINXs.
To Next Page
Loading...
