Aastra Ascotel IntelliGate 2065 - 8.3.4 Brokering (switching back and forth between two calls)

Ascotel IntelliGate 2025/2045/2065
462 Features Part 2
Suffix dialling procedures
Set up enquiry call: see "Hold (enquiry call)", page 460.
Tab. 2.160: Enquiry call with return to the initial call: Procedure
System configuration
Tab. 2.161: Enquiry call with return to the initial call: System configuration
Reference to Other Features
8.3.4 Brokering (switching back and forth between two
calls)
A subscriber can switch back and forth as often as required between his call party
and the subscriber on hold.
Fig. 2.175: Brokering
System Terminals a/b terminal
Return to the initial call with the disconnect key • with R1 (R = control key) or wait for more than
2 seconds after pressing the control key
• by putting the handset on-hook and then tak-
ing it off-hook again after recall
Parameter Parameter value Remarks
Hold in the exchange Yes / No • In the group configuration.
• Local feature does not require a setting
Music on hold None / External / Internal /
Hold tone
Throughout the system
Features:
• "Hold (enquiry call)", page 460
• "Brokering (switching back and forth between two calls)", page 462
• "Three-party conference from an enquiry call", page 464
• "Call transfer (switching)", page 467
• "Call waiting", page 477
haz0591aaxxa0
A B
C