Aastra Ascotel IntelliGate 2065 - Page 476

Ascotel IntelliGate 2025/2045/2065
476 Features Part 2
Tip:
The name of a PISN subscriber can be configured in a PINX subscriber
configuration, provided the subscriber’s number is entered in full (see
"Numbering Plan", page 161).
System configuration
Tab. 2.185: Dialling by name: System configuration
End-of-selection signal
The input of an external number can be completed with the character #. The PBX
(or network system) interprets this as the end of selection and immediately
switches through.
Detailed Description
Dialling with end-of-selection signal is important in two cases:
• when dialling an external number in an open numbering plan (Fig. 2.184).
• when the LCR (Least Cost Routing) function is activated: In this case the PBX
has to wait until the subscriber has entered all the digits before it can forward
the complete number to the network provider configured. The end-of-selec-
tion signal does not require any additional waiting time (Fig. 2.185).
Fig. 2.184: Dialling with end-of-selection signal
Parameter
Subscriber name, abbreviated dialling name, PISN subscriber name, user group name
Network
Network
system
PBX
haz0586aaena0
#
0-......#