Aastra Ascotel IntelliGate 2065 - 8.4.7 duplex mode

Ascotel IntelliGate 2025/2045/2065
Part 2 Features 487
Subscriber A: At the end of the call the subscriber’s exchange access is automat-
ically barred again.
Under Charge Recall in the AIMS Account Manager a time can be configured for
both standard and phone booth connections by which a charge recall is delayed
when the handset goes on-hook. This means that more than one exchange call
can be made before the charge recall is effected. If the configured time is greater
than zero, the internal subscriber automatically obtains the exchange free signal
when he picks up the handset again and is able to dial a new number directly. If
the subscriber does not pick up the handset within the time delay, a charge recall
is effected.
Tip:
Store charge recall (*32 phone booth No.) under a function key.
Prefix Dialling Procedures
Tab. 2.201: Charge recall: Procedure
System configuration
Tab. 2.202: Charge recall: System configuration
Reference to Other Features
8.4.7 duplex mode
Duplex mode is a special of announcement whereby the called system terminal B
immediately transform A’s announcement into an internal call.
*/# procedure
Activate charge recall to standard connection *32 SC No.
Parameter Parameter value Remarks
Charge recall, normal 0 to 120 seconds
Charge recall, phone booth 0 to 120 seconds
Features:
• "Phone booth", page 551"