Ascotel IntelliGate 2025/2045/2065
Part 2 Features 513
Authorized Users
For a user to be able to operate the "Terminal per call" feature, he must be known
as an internal subscriber to the system and have his own personal password. He
defines the password on his own terminal:
• Password syntax:
– System terminals: 2 to 10 digits (digits 0 to 9)
– Other terminals: 4 digits exactly (digits 0 to 9)
• Password validity
– The password is valid for unlocking all terminals that were locked with this
phone lock variant.
– The initialization password "0000" cannot be used to unlock a terminal that
was locked with this phone lock variant.
The password is stored in the system under the user's subscriber configuration.
Procedures
Tab. 2.244: Unlocking the terminal for each call: Procedures
System Configuration
Tab. 2.245: Unlocking the terminal for each call: System configuration
*/# procedure System Terminals
Unlocking a
third-party
for each
call
#36
<SC
No.>
<Password>
System te
rminals:
• The function can be configured
onto a key
Unlocking one's own terminal for each
call
#36
<SC
No.>
<Password>
Office
40,
Office
45
• With the code key
System terminals with display:
•
Parameter Parameter value Remarks
Subscriber configuration of the terminal to be locked:
• Phone lock:
1)
On Activates the lock
• Internal phone lock Internal digit barring 1 to 8 Definition of internal dialling possibilities in
the locked state
• External phone lock External digit barring 1 to 8 Definition of external dialling possibilities in
the locked state
• Internal digit barring:
Input for the locked state
• #36 enable
• #33 bar
• Allows unlocking for each call
• Prevents permanent unlocking. Important:
Without this input the lock can be lifted at
any time by the user.
To Next Page
Loading...
