EasyManua.ls Logo

Aastra Ascotel IntelliGate 2065 - Page 693

Aastra Ascotel IntelliGate 2065
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel IntelliGate 2025/2045/2065
Part 3 Planning a private network 693
2. In each system configure its own region prefix under the basic settings:
In System 1: Own regional prefix: 40
In System 2: Own regional prefix: 50
In System 3: Own regional prefix: 60
The further procedure depends on whether region selection is implemented via
PISN subscriber or via local area network (see also the explanations on page 675).
In the following we shall be looking at both types.
Region selection via PISN subscriber
The regions of all the other systems are now entered in each system. To do so cre-
ate numbers in the PISN subscribers category in the numbering plan. There you
can create either individual numbers or number ranges by specifying the range
with "XX". Each "X" corresponds to one digit place.
1. In system 1 create the following PISN subscribers:
One PISN subscriber with the number 50XXX (region of system 2)
One PISN subscriber with the number 60XXX (region of system 3)
2. In system 2 create the following PISN subscribers:
One PISN subscriber with the number 40XXX (region of system 1)
One PISN subscriber with the number 60XXX (region of system 3)
3. In system 3 create the following PISN subscribers:
One PISN subscriber with the number 40XXX (region of system 1)
One PISN subscriber with the number 50XXX (region of system 2)
Under the subscriber configuration are the PISN subscribers you have just created,
with the numbers 40XXX, 50XXX and 60XXX.
The setting options for PISN subscribers differ from those of ordinary internal sub-
scribers. Next use the "route" setting to allocate routes to the PISN subscribers:
1. Assign the routes for the PISN subscribers of system 1:
PISN subscriber 50XXX: Route 6
PISN subscriber 60XXX: route 7
2. Assign the routes for the PISN subscribers of system 2:
PISN subscriber 40XXX: Route 5
PISN subscriber 60XXX: route 7
3. Assign the routes for the PISN subscribers of system 3:
PISN subscriber 40XXX: Route 5
PISN subscriber 50XXX: route 6

Table of Contents

Other manuals for Aastra Ascotel IntelliGate 2065

Related product manuals