Ascotel IntelliGate 2025/2045/2065
Part 7 885
Part 7 Operation and Maintenance
1 Overview of Chapters
Data Maintenance
Chapter 2 describes how to save, update, load and service data. First it explains
which memories are used to store the system software and configuration data
and where those memories are located on the components.
The next topic is how to update the system software on the PBX and on the ter-
minals. The handling of configuration data (Upload / Download, Backup/Restore)
is menu-driven using AIMS.
The final section deals with backing up and deleting system configuration data
and terminal configuration data. With terminals it is possible to use AIMS to
delete the configuration data for all the terminals simultaneously or for just one
specific terminal.
Hardware updates and system expansion
Chapter 3 looks at how to adapt an existing system to customer requirements. It
explains which configurations are subject to licensing, the scope covered by
licensing in each case, the processes that influence licensing, and how to modify
an existing licence.
When replacing expansion cards or Office terminals with terminals of a different
type, it is possible under certain circumstances to transfer the configuration data.
Information on the procedure for replacing hardware can be found in the second
half of this chapter.
Operations supervision
The subject of Chapter 4 is the AIMS System Event Manager (SEM) for recording
event messages generated by the system. The event message concept with
detailed event messages, which can be specifically configured and analysed, sup-
ports both local and remote maintenance. For remote maintenance the Fault &
Maintenance Manager is used in addition.
To Next Page
Loading...
