Ascotel IntelliGate 2025/2045/2065
896 Data Maintenance Part 7
2.2.4 Emergency Upload of the system software
An Emergency Upload has to be activated whenever a standard software upload
is not possible or has proved faulty.
To ensure a successful Emergency Upload, proceed as follows:
1. Call up the AIMS Upload Manager.
2. Select the "Configuration" tab.
3. Enter the password for access to the PBX.
4. Select the system type.
5. Click the "Add" button in the "Software Version" field and specify the direc-
tory containing the zip-file with the system software you want to install.
The software version you have added appears in the list box.
6. Select the software version you want from the list box.
7. In the "PBX connection" field select "Local access Xmodem port" (see "PBX
connection", page 891).
8. Use the "Settings" button to set the connection parameters (see "Setting",
page 892).
9. On the "PBX" tab click the "Upload" button.
If a connection was successfully set up with the PBX,a prompt will appear to ask
whether the loaded system software is to be activated with or without PBX initial-
ization after the software upload.
If the newly loaded system software is activated without initializing the PBX, any
existing configuration data will be retained. If the newly loaded system software
is activated with a PBX initialization, all existing configuration data will be deleted
or reset to the initialization values.
10. Select the process you want.
The Emergency Upload is started.
The Emergency Upload sequence can be monitored using the 7-segment display.
To Next Page
Loading...
