Ascotel IntelliGate 2025/2045/2065
900 Data Maintenance Part 7
2.4 Updating configuration data
System configuration data can only be modified using AIMS (see also "System
configuration data", page 889).
Terminal configuration data can be modified using both AIMS and the system ter-
minal (see also "Terminal configuration data", page 889).
2.4.1 Saving configuration data with AIMS
The procedure for saving configuration data with AIMS
(Upload / Download, Backup / Restore) is described in"Exchanging data between
PBX and PC", page 153.
2.4.2 Deleting system and terminal configuration data
Deleting system configuration data
To delete the system configuration data from a system terminal, delete the termi-
nal's subscriber number from the numbering plan in the system configuration
(Configuration Manager) using the Delete key. All the data is then reset to its ini-
tialization values.
Terminal configuration data of all system terminals
To delete the terminal configuration data of all the Office system terminals, use
the "Delete Office data" configuration menu.
A warning message appears before deleting begins and you can cancel the delete
process without any change to the data. The system configuration data of all the
terminals is retained.
Terminal configuration data of one system terminal
To delete the terminal configuration data of an individual Office system terminal,
delete the terminal's subscriber number from the numbering plan in the system
configuration (Configuration Manager) using the Delete key, then re-enter a new
number. All the data is then reset to the initialization values.
To Next Page
Loading...
