EasyManua.ls Logo

Aastra Ascotel IntelliGate 2065 - 3.3 System cards; 3.3.1 Memory cards

Aastra Ascotel IntelliGate 2065
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ascotel IntelliGate 2025/2045/2065
Part 7 Hardware updates and system expansion 909
Signal processor cards DSP-01 / DSP-02 / DSP-04:
These special cards do not contain any data that has to be saved prior to a card
change.
Door intercom card OI-2DOOR:
This special card does not contain any data that has to be saved prior to a card
change.
3.3 System cards
System cards are necessary for operating the PBX. There are different memory
cards and the processor card for the 2065 basic system. This chapter describes
when and whether a system card should be replaced.
3.3.1 Memory cards
Flash card
The Flash card is replaced together with the mainboard and therefore does not
have to be removed separately. Exceptions:
Updating the PBX boot software (see page 899).
A system defect (e.g. mainboard) can make it impossible to read out unstored
configuration data with AIMS. In such cases the data can be saved using a new
mainboard.
Upgrading system 2065 from I5 to I6 (see page 959)
RAM card
The RAM card is replaced together with the mainboard and therefore does not
have to be removed separately (Exception: Upgrading system 2065 from I5 to I6,
see page 959).
EIM card
For information on how to replace the EIM card (see page 901)

Table of Contents

Other manuals for Aastra Ascotel IntelliGate 2065

Related product manuals